Article contents
Key takeaways
Key Takeaways
- Understanding how old your laptop is helps determine its resale value and security support.
- You can check your laptop’s age on Windows using ‘msinfo32’ or ‘systeminfo’, and on Mac via ‘About This Mac’ or serial number lookup.
- Laptops older than five years may lose security updates and increase data risks for businesses.
- Look for signs like performance issues or inability to run current operating systems to decide if retirement is necessary.
- Proper disposal includes data wiping and recycling through a certified handler for compliance.
Why laptop age matters for businesses
A laptop’s age affects far more than its resale value. Manufacturer support windows, security patch availability, battery condition and total running cost are all tied to how long a machine has been in service. For businesses, the stakes are higher than for individual users: an aging machine that is still holding company data, running unsupported software or causing productivity problems is a liability, not just an inconvenience. Asking “how old is my laptop?” is the right starting point.
Understanding where your devices sit in their lifecycle is the starting point for any sensible laptop refresh cycle for business. The question “how old is my laptop?” is one every IT manager and business owner should be able to answer – and the first step is simply knowing how to find out.
How to check your laptop’s age on Windows
There are two reliable methods. The first is faster; the second gives a more precise manufacture date where the first is inconclusive.
Method 1: system information
Press the Windows key and R at the same time to open the Run box, type msinfo32, then press Enter.
In the System Information window that opens, look for “BIOS Version/Date” in the right-hand panel. The date shown here is typically when the BIOS was installed at the factory, which is a reliable proxy for the manufacture date on most machines. This method works on virtually all Windows laptops without needing any additional tools.
Note: this shows the original BIOS date unless the firmware has been manually updated, which is uncommon on most business machines and would typically be recorded in your IT asset log.
Method 2: command prompt
Open Command Prompt by searching for “cmd” in the Start menu. Type the following and press Enter:
systeminfo | find “Original Install Date”
This returns the date Windows was originally installed on the machine. On a new device straight from the manufacturer, this closely corresponds to the manufacture date. On a remanufactured or reimaged machine, the date reflects the OS reinstall rather than the hardware age, so it is worth cross-referencing with the BIOS date method above if the results seem inconsistent.
How to check your laptop’s age on a Mac
Method 1: about this Mac
Click the Apple menu in the top-left corner of the screen and select “About This Mac.” The overview panel shows the model name and year – for example, “MacBook Pro (2019).” This year refers to the model generation rather than your specific purchase date, but it is a reliable indicator of hardware vintage and determines which macOS versions the machine can run.
Method 2: serial number lookup
Go to “About This Mac” and click on the serial number to copy it. Then go to checkcoverage.apple.com and enter the serial number. Apple’s coverage checker shows the original purchase date and remaining warranty status. This is the most accurate method for confirming actual purchase date, particularly for second-hand or inherited hardware where the model year alone may not tell the full story.
What age means for your laptop’s useful life
Once you know how old your laptop is, these benchmarks give a practical framework for assessing what that age means. They apply broadly to business laptops, though individual variation exists depending on manufacturer, usage pattern and maintenance history.
In years one to three, a laptop is typically within its manufacturer support window, still receiving operating system and security updates, and hardware faults are relatively uncommon. Years three to five represent the zone where most business laptops begin to show wear: batteries lose capacity, thermal performance may degrade, and warranty cover has usually expired. Repair costs at this stage are worth evaluating against the machine’s remaining useful life.
Beyond five years, most manufacturers have ended driver and BIOS support. The Windows 10 end of support in October 2025 means that older machines unable to run Windows 11 are now approaching a security cliff: they will continue to function but will no longer receive security patches, making them a liability in any environment handling sensitive data. Beyond seven years, hardware failures become statistically more likely, replacement parts harder to source, and the total cost of ownership almost always favours retirement over continued use.
Signs it is time to retire rather than repair
Age alone does not determine when to replace a business laptop. These are the clearer signals that retirement is the right call.
The machine cannot run Windows 11 and will lose security support as a result. Battery replacement cost approaches or exceeds the machine’s residual value. Recurring faults suggest underlying hardware degradation rather than a one-off repair. Performance is impeding productivity despite software optimisation. The machine is sitting unused because staff prefer anything else – which means it is holding data without serving any purpose.
Any of these individually is a reason to review the device. More than one is a reason to act.
What to do with a laptop you are retiring
Before disposal, any business laptop must have its data wiped to a certified standard. A factory reset is not sufficient: it does not overwrite data to a level that prevents recovery, and it does not produce the documentation your business needs. We provide certified data destruction as part of every collection, with a Certificate of Data Destruction per device if required confirming the serial number and the method applied.
Once data is cleared, recycling through a registered WEEE handler ensures the machine is processed compliantly and kept out of landfill. Our laptop recycling service covers free collection for qualifying businesses, full WEEE documentation and a Certificate of Recycling for your compliance records. If a device has refurbishment potential, we assess it before any recycling decision – reuse always comes first.
From age check to action
You can find out how old your laptop is in just a few minutes with the instruction listed above. Deciding what to do about it requires a little more thought, but the framework is straightforward. If a device is approaching or beyond five years, is showing signs of wear, or cannot run a currently supported operating system, retirement is worth planning for rather than reacting to. We make that process simple with free collection for qualifying businesses, certified data destruction, and full documentation. Contact us to arrange a compliant collection whenever you are ready.
Frequently asked questions
Use the BIOS date method on Windows or the Apple serial number checker via checkcoverage.apple.com on Mac. For Windows devices, some manufacturers including Dell and Lenovo offer online tools where you can enter a serial number to retrieve the original manufacture date and warranty status – check the manufacturer’s support site directly. The purchase date of second-hand hardware is less relevant than the manufacture date for assessing remaining useful life.
Yes, indirectly. Older machines are more likely to be running operating systems that no longer receive security patches, increasing vulnerability to known exploits
Use the BIOS date method on Windows or the Apple serial number checker on Mac. For hardware procured through a reseller, your purchase order records should include individual serial numbers against invoice dates, which your finance or IT team can cross-reference. This is also a good prompt to review whether your asset register is being maintained consistently.
There is no single answer, but most businesses find that a structured laptop refresh cycle of three to five years strikes the right balance between total cost of ownership and device performance. Waiting until machines fail creates data risk and productivity disruption; replacing too early wastes money and generates unnecessary waste. Knowing your fleet’s age profile is the first step toward making that decision on evidence rather than guesswork.
If the machine is beyond five years old, has recurring faults, or cannot run a currently supported operating system, repair costs are rarely proportionate to the remaining useful life. Our article on refurbishment vs recycling sets out how to weigh up the options and what the decision means for your sustainability footprint.